Detailed Product Description

CHG series full hydraulic two-platen injection moulding machine for plastic, relying on independent intellectual property rights, make full use of the internal groups advanced technologyHOYEAelectrohydraulic control,HOPEA(microcomputer frequency Conversion control) and precision injection molding machine developed independently by injection molding machine experienced engineers in CHAP Machinery. With the latest European Hydraulic Design Concept, CHAP Machinery electro-hydraulic control specialists make great efforts to build the plastic injection equipment with environment-friendly and energy-saving.

• Injection moulding machine Features: 

   Super-Large space, we can make machine as the requirement of customers products, with parameters strong adaptability.
   Short clamping stroke line, is only the distance between main moving platen and fixed platen, mould- clamping is high rigidity and precision.
   Main moving platen adopts oil-less self-lubricating copper sets guide, ensure clean production environment. Support sliding feet can choose linear slide way guide, which greatly enhance the rigidity of clamping unit and service life of mould..
   Using the latest German sealing technologies and products, ensure the sealing performance high.
  Hydraulic system adopts proportional integrated instrument control system to ensure the mould transfer rapidly, stably.
   Electrical system uses Siemens controller, with high speed, good stability, high performance and good scalability.

• injection molding machine technical specification

Item	Unit	Parameter
Screw no		A	B	C
Screw Dia	mm	38	42	45
Screw LD ratio		23.2	21	19.6
Theoretical capacity	cm3	209	256	294
Injection weight	g	190	233	267
Injection Pressure	MPa	243	199	173
Injection rate	g/s	100.9	123	141.2
Plasticizing capacity	g/s	14.7	18.2	20.6
Max. screw speed	rpm	200
Clamping force	kN	1280
Moving mould distance	mm	560
Tie bar spacing	mm	420×420
Max.Daylight	mm	730
Min. mould thickness	mm	170
Ejector stroke	mm	150
Ejector force	kN	41
Ejector bar amount		5
Max.pump pressure	MPa	17.5
Pump motor power	kW	15
Heating power	kW	7.5
External dimension	mm3	4500×1600×2100
Weight	Kg	5500
Material cylinder capacity	L	25
Oil tank capacity	L	265